Skip to main content

Flagship service

Resinbound driveways, paths and patios.

One seamless surface, laid properly, with no joints to weed and no loose stone to migrate. It is the service we do most, and the one we are happiest to talk you through.

Why people choose it

It looks the same in year one and year ten.

Resinbound is a good fit for a front driveway that takes the weight of a car, a back path that takes a wheelbarrow, or a patio that needs to survive a Scottish winter without shifting.

  • Seamless

    There are no joints for weeds to root in and no loose stone to rake up, because the aggregate is locked into a continuous surface.

  • Right across the garden

    It suits driveways, paths, patios and steps, so you can run one material through the whole garden if that is what you want.

  • A natural look

    The finish is made from real aggregate, so it reads as stone rather than plastic — and it suits a modern house or an older one.

  • Comfortable underfoot

    Warm and slightly forgiving to walk on, which is one of the reasons people choose it for paths and patios as well as driveways.

Registered Vuba installer

Laid with Vuba, backed by a 25-year Vuba warranty.

We are a registered installer of Vuba resinbound. Every surface goes down as a 30mm resin base with an 18mm resinbound top layer, and the finished surface is fully porous, so rainwater drains straight through rather than pooling or running off.

Base
30mm resin base
Surface
18mm resinbound top layer
Drainage
Fully porous
Warranty
25-year Vuba warranty

How it works

Four stages, and the base is the one that matters.

Most shortcuts show up three years later. We spend the time on preparation so the surface has something solid to sit on.

  1. Survey

    We come out, look at the ground, the levels and the drainage, and talk through what you want to achieve.

  2. Prepare

    Old surface lifted where necessary, ground dug out and levelled, then a compacted base built up properly.

  3. Lay

    A 30mm Vuba resin base, then an 18mm resinbound top layer in your chosen aggregate, worked evenly across the area.

  4. Finish

    Edges cut back cleanly, steps and transitions tidied, and the area left ready to use.

Our work

Resinbound driveways, paths and steps.

  • A wide grey resinbound driveway curving past a rendered house, edged with charcoal block and bordered by artificial grass and a mature maple tree.
    Resinbound driveway sweeping past the house
  • A curved resinbound driveway in natural grey aggregate leading to the front of a rendered house, with a neat lawn edge on both sides.
    Curved driveway to the front door
  • A resinbound front path edged in charcoal block, running from the garden gate between two lawns to a red front door with clipped topiary either side.
    Straight run to the front door
  • A resinbound driveway curving up to a bungalow, bordered by artificial lawn, a Japanese maple and planters.
    Driveway up to a bungalow
  • An artificial lawn laid beside a resinbound driveway, edged with charcoal block, with a Japanese maple in a round bed and a stone wall in front.
    Driveway alongside artificial lawn
  • A resinbound driveway with matching resinbound steps leading up to the door, beside a red brick wall and dark bin store.
    Driveway with matching steps
  • Close-up of resinbound steps in a natural grey aggregate with charcoal risers, flanked by a bamboo and stone planter.
    Resinbound steps
  • A resinbound front path edged in charcoal block, angling across the lawn from the street to a red front door on a white pebbledash house.
    Resinbound front path
  • A resinbound path edged in buff block, wrapping around a rectangular artificial lawn beside a white block wall topped with charcoal fencing.
    Resinbound path and artificial grass
  • A resinbound path edged in buff block running between artificial grass and a grey-clad garden room with glazed doors.
    Resinbound path past a garden room

Common questions

Before you commit.

How long does a resinbound driveway take?
It depends entirely on the size and the condition of what is underneath. A small path is often a day; a full driveway usually needs the groundworks and the laying across more than one visit. We will give you a proper timescale when we have seen it.
Do I need to replace what is already there?
Not always. A resinbound surface needs a solid, well-drained base, so badly failing concrete or tarmac usually has to come up. If what you have is sound we can often lay over it, which saves you money. We will tell you honestly which situation you are in.
Can you match my existing paving?
For porcelain we can work with a range of greys and buffs and cut the edges to suit your layout. For resinbound we can get close to an existing tone using the aggregate blend, but we will always show you a sample first rather than promising an exact match.
What about drainage?
The Vuba system we lay is fully porous, so rainwater drains straight through the surface rather than running off it. We still look at how the ground falls and what is underneath when we survey the job, so the water has somewhere to go.
Do you cover the whole of Tayside?
We work across Dundee, Angus, Tayside and Fife. If you are just outside that ring, ring us anyway and we will let you know straight away if we cannot help.

Still not sure? Give us a ring and we will talk it through with you.

Thinking about resinbound?

Send us a photograph and a rough idea of the size, and we will come out, look at the base, and give you a straight quote.